Search

635 Results
Section: Equipment > Crane
Earthmoving Equipment
How Heavy Equipment Cab Redesigns Improve Safety, Uptime
The addition of comfort and safety features to work carried out in the elements not only provides a positive environment for operators, but also increases contractor productivity and profitability.
October 18, 2024
CASE Construction Equipment recently announced new models and upgrades to empower construction and utility crews facing labor shortages and constrained jobsites in an effort to allow teams to accomplish more with less amidst growing demands from booming infrastructure investments.
Crane
Liebherr Adds MK 120-5.1 to Mobile Construction Crane Series
Liebherr USA, Co.
The five-axle machine bridges the gap between the MK 88-4.1 and the MK 140-5.1.
September 29, 2024
The five-axle machine bridges the gap between the MK 88-4.1 and the MK 140-5.1.
Contractors’ Top 50
Equipment Today Recognizes the 2024 Contractors’ Top 50 New Products
The winners of the award represent an array of innovative solutions to improve productivity, efficiency, safety and comfort.
September 16, 2024
2022 Contractors Top 50 New Products Award 63f589c68dad5 65e5e95d485ed
Crane
Mammoet Introduces SK6000 Crane with 6,000t Capacity
Mammoet
The SK6000 has a maximum capacity of 6,000t, utilizing 4,200t of ballast to lift with a maximum ground bearing pressure of 30t/m2.
September 5, 2024
The SK6000 has a maximum capacity of 6,000t, utilizing 4,200t of ballast to lift with a maximum ground bearing pressure of 30t/m2.
Crane
Manitowoc Unveils Grove GRT765 and GRT780 Rough-terrain Cranes
Manitowoc Cranes
Manitowoc GRT765 and GRT780 models are in the mid-capacity rough-terrain crane segment.
August 21, 2024
Manitowoc GRT765 and GRT780 models are in the mid-capacity rough-terrain crane segment.
Worksite Equipment
Danfoss Releases IK1-G Remote Control
Danfoss Inc.
The Danfoss IK1-G remote control is designed for telescopic, service and loader cranes, as well as tow trucks.
June 4, 2024
Danfoss Ik1 G Remote Control
Fleet Maintenance
World’s First Hydrogen Fuel Cell RTG Crane Operational
PACECO
The H2-ZE RTG Transtainer Crane runs 100% on fuel-cell hydrogen technology, representing an unprecedented first for terminal operations, offering the ability to achieve zero emissions on large container cranes without connecting to the electric grid.
May 29, 2024
The H2-ZE RTG Transtainer Crane, developed in collaboration with MITSUI E&S and with funding from the Japanese New Energy and Industrial Technology Development Organization (NEDO), began operations at Yusen Terminals Inc. (YTI) on May 15, 2024.
Crane
Liebherr LTM 1100-5.3 All-terrain Crane
Liebherr USA, Co.
The Liebherr LTM 1100-5.3 has a maximum capacity of 110 tons and a long 203-ft. telescopic boom for reach.
May 3, 2024
The Liebherr LTM 1100-5.3 has a maximum capacity of 110 tons and a long 203-ft. telescopic boom for reach.
Crane
Liebherr Showcases 195 HC-LH 6/12 Hydraulic Luffing Jib Crane
Liebherr USA, Co.
With a minimal working radius of 3m and an out-of-work position of 10m, the crane can be adapted to construction site conditions.
April 23, 2024
With a minimal working radius of 3 m and an out-of-work position of 10 m, the crane can be adapted to construction site conditions.
Crane
XCMG Launches G2 Cranes
XCMG North America
The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.
April 16, 2024
The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.
Crane
XCMG Reveals XCA4000 Wheeled Crane with 4,000-ton Lifting Capacity
XCMG North America
The wheeled crane features a 4,000-ton lifting capacity, making it a solution for installing wind turbines exceeding 10 MW.
April 9, 2024
For guidance during use, the XCA4000 is equipped with a self-developed control system and active safety technology with more than a dozen sensors distributed on the boom.
Construction Safety
Crane Safety Report Reveals Dangers and Best Practices
National Safety Council
As the crane industry continues to navigate major safety challenges, NSC and the NCCCO Foundation plan to continue to provide additional resources to educate crane operators, inspectors, and employers about potential workplace hazards.
April 4, 2024
While cranes play a vital role in the transportation, construction, and agriculture industries, among others, operating this type of equipment can be especially dangerous if proper protocol is not followed.
Construction Safety
Alternate Temporary Channels Opening Around Key Bridge in Baltimore
A temporary, alternate channel on the northeast side of the main channel in the vicinity of the Key Bridge is being established for commercially essential vessels.
April 2, 2024
Demolition crews with the Unified Command begin cutting the top portion of the north side of the collapsed bridge into smaller sections for safe removal by crane in the Patapsco River, in Baltimore, Maryland, March 30, 2024. Salvage teams use exothermic cutting torch to systematically separate sections of the steel bridge, which will be taken to a disposal site.
Crane
Liebherr Offers 25 L and 33 L Cranes
Liebherr USA, Co.
The 25 L and 33 L cranes are equipped with Liebherr Control 5 hardware and Tower Crane OS (Tower Crane Operating System 2).
March 19, 2024
The 25 L and 33 L cranes are equipped with Liebherr Control 5 hardware and Tower Crane OS (Tower Crane Operating System 2).
Business
Stellar Unveils Upgrades to TMAX Mechanic Trucks at Work Truck Week 2024
Stellar
Aimed at enhancing functionality and the user experience, updates to the Stellar TMAX lineup include new boom-tip lights on cranes, which offer a smaller profile to fit into tighter spaces and feature six LED lights for optimal brightness.
March 11, 2024
This easy-to-use design offers a more ergonomic and user-friendly experience.
Crane
What’s Next for Venco Venturo
Venco Venturo Industries LLC
Ian Lahmer, vice president of sales and marking for Venco Venturo Industries, discusses the company’s history with NTEA, plans for the future and more at Work Truck Week 2024. Tune in to learn more about what this company has its sights set on next.
March 11, 2024
Venco Shot
Business
Stellar Expands Manufacturing with New Facility in Iowa
Stellar
With more than 800 employee-owners companywide, Stellar is excited to continue to grow job opportunities and contribute to the community.
March 7, 2024
Stellar anticipates utilizing the newly purchased property to expand its manufacturing capacity over the next few years.
Business
Load King and Custom Truck One Source Showcase Electric, Hybrid Trucks at Work Truck Week 2024
Load King by Custom Truck One Source
Join Load King and Custom Truck One Source at NTEA Work Truck Week 2024 to experience the future of the work truck industry.
March 7, 2024
Attendees are invited to visit booth 4101 to explore a range of equipment designed to set new standards in operational efficiency and environmental sustainability in the work truck sector.
Page 1 of 36
Next Page